Inside mounted shades will have a deduction taken of approximately 1/4″ to ensure a proper fit inside the window frame.Inside mounted shades require a minimum frame depth of 2.5inch for secure installation. If your window frame depth is less than 2.5inch please select outside mount.Outside mounted shades should be ordered with the exact width of the area you wish to cover. Outside mounts are often used when there is not sufficient frame depth for inside mounting.Our shades come with all mounting hardware, and mounting hardware for both inside mount and outside mount
INSIDE MOUNT MEASUREMENT:
Step 1.Measure the inside frame width at three locations-the top,middle,and bottom. Record the smallest of the 3 measurements and use that number deduct 1/4inch as your inside width when ordering.
Step 2. Measure the height at 3 locations-the left,middle,and right side. Record the smallest of the 3 measurements and use the number as your inside width when ordering.
OUTSIDE MOUNT MEASUREMENT:
Step 1. Measure the outside frame width adding 6-10inch to be the outside mount width.
Step 2. Measure the outside frame length adding 5-10inch to be the outside mount length. The overlap it recommended to allow appropriate coverage and avoid any light gaps.
Type: Solid color roller shade.
Feature: Thermal Blackout Waterproof
Material: Polyester Fabric
Installation: All Mounting Hardware Included.
- DESCRIPTION:Cordless blackout roller shade made out of fabric,no cords for a clean look and child safety. The cord in the bottom bar is removable,which help you pull up and down. No sunlight gets through this shade and it is same color facing the street,block 100% light and UV ray,energy saving insulates against heat and cold,noise is reduced and provide privacy.We can custom size to suit your windows,maximum size is 90″ wide and 118inch long.We can customize window shades up to an 1/16th inch.
- INSIDE MOUNT:Min depth for inside mount is 2.5″, shade width is at least 0.25″ less than widnow width, shade length is at least 3″ longer than window height. Take example, if window inside is 25.5″ wide by 36″ high, shade width should less than 25.25″(25.5″-0.25), shade length should longer than 39″(36″+3″), choose the closest size 25″ W x 40″L then reply us email telling us two information:1) window size 25.5″ wide by 36″ high. 2)Inside mounting. We will change the size to 25 1/4″W x 39″L.
- OUTSIDE MOUNT: Shade width need to be 3-6″ wider than window width, shade length need to be 8-10″ longer than window length for better coverage. Take example,if window outside is 25.5″ wide by 36″ high, shade width should more than 28.5″(25.5″+3″), shade length should longer than 44″(36″+8″). Choose the closest size 29″ W x 44″L to place order then reply us email telling us two information:1) window size 25.5″ wide by 36″ long. 2)Outside mounting.
- ATTENTION: The width does include the brackets which take up a minimum of 0.6″ on each side then you have your roll with the material.So material width will be at least 1.2″ smaller total. For an inside mount you will have a tiny gap on each side. Order the closest size and then we will send email within 24 hours to confirm window information,if we do not get any reply in 48 hours, we will make the size without any adjustment.
- SHIPPING: WE DO NOT DELIVER TO PO BOX ADDRESSES AND APO ADDRESS,Courier companies do not deliver to PO boxes and APO address because the shades are too long for Post. PROJECT SUCCESS GUARANTEED: When you shop with us,we guarantee your project will be a success. No matter if you made a mistake or there are other issues, you will be covered. Cell Phone:(929)336-2336